differential pressure sensor with lcd

How do our differential pressure sensing element function? Study this in our summarization!

The differential pressure in non-aggressive gasses and atmospheres can be grasp with the pressure sensor for the metering of differential pressure. The used metering item is a pressure detector produced into Si technology. The pressure sensor use a wheatstone resistance bridge for the capturing of the pressure alteration which was diffused into the silicon crystal. The measurement signal gets temperature and pressure compensated by means of IC. Each pressure transducer will be calibrated during the assembling method. Through this a high reliability and correctness of the pressure sensor is guaranteed.

Dissimilar signals are ready for use as an output signal depending on application example. Besides the norm signals of 0 …. 10 V or 4 …. 20 mA the pressure transducers for differential pressure can also be delivered with a gSPI interface. It is also possible to deliver the differential pressure pressure sensors with mixed output signals so that the output signal can be chosen at the location of use by means of jumper.

The gSPI interface is a bus system. Up to 120 pressure transmitters can be achieved at this. The coupling of pressure detectors for differential pressure without gSPI interface is carried out by bus connection modules to the gSPI bus.

The pressure-metering transmitters are obstructed in a synthetic housing in IP65. The pressure-gauging sensor can alternatively be assembled with a 4-digit LCD for the indication of the measurement. The unity is also shown on the display as well as the measurement.

The pressure-metering transmitter can instead be distributed for differential pressure also in a extreme-grade steel execution. The differential pressure can be measured in liquids and aggressive conditions with that. At this version the gauging item consists of a pressure sensor established in thin film technology on a extreme-grade steel membrane. It is therefore guaranteed that all medium touching parts consist of exorbitant-grade steel completely. A wheatstone resistance bridge circuit is used for the detection also at this pressure sensor. By use of a semiconductor chip the measurement signal of the wheatstone bridge gets temperature and pressure compensated. Previous to delivery this pressure transducer is also calibrated to be able to attest a extreme precision and accuracy.

This pressure-measuring transducer can be delivered with the output signals 0 …. 10 V, 4 …. 20 mA or 0 …. 20 mA.

The use of these pressure sensors for differential pressure is carried out in the clean room, medication and filtering technique in ventilating systems and climate channels into paint spraying cabins or into canteen kitchens.

differential pressure sensor with lcd

Each differential pressure pressure sensor can be distributed on call with a calibrating certificate also with DKD-calibrating testification.

differential pressure sensor with lcd in high-grade steel

Hints

You may link to this page!

The pressure transducer is maintenance-free.

This page was arranged with care. It, even so, was not possible to take into account all conceivable function circumstances. If you should miss notes for your particular formulation, use the contact form for your questions.

Indications for safety causes

Notice the corresponding national safety regulations (e.g. DIN VDE 0100 part 410) absolutely for assembly, putting into operation and operation of these pressure sensors.

Mistakes and changes in the sense of technical improvements reserved.

Related posts:

1. absolute pressure
2. relative pressure

relative pressure sensor with lcd

How do our relative pressure transmitter operate? Read this in our summarization!

The relative pressure-measuring sensor can be distributed for relative pressure  in a high-grade steel execution. The relative pressure can be measured in liquids and aggressive media with that. At this construction the measuring element consists of a pressure sensor established in thin film technology on a exorbitant-grade iron steel membrane. It is in consequence warranted that all medium touching parts consist of high-grade iron steel completely. A wheatstone resistance bridge is used for the measuring at this pressure detector. By use of a semiconductor chip the measurement signal of the wheatstone bridge gets temperature and pressure compensated. Previous to shipment this pressure transmitter is calibrated to be able to warrantee a high correctness and reliability.

This pressure-measuring transmitter can be distributed with the output signals 0 …. 10 V, 4 …. 20 mA or 0 …. 20 mA.

The use of these pressure sensors for relative pressure is carried out in pneumatics, process measuring technique and in the building technology. The pressure transmitter could also be delivered with an EEx-approval.

Each relative pressure pressure transmitter can be delivered on inquiry with calibrating testification also with DKD-calibrating testification.

relative pressure sensor in high-grade steel

Advices

You may link to this page!

The pressure transmitter is maintenance-free.

This site was arranged with attention. It, however, was not possible to take into answer for all imaginable application circumstances. If you should consider to miss hints for your special formulation, use the contact form for your doubts.

Notes for safety arguments

Observe the corresponding national safety regulations (e.g. DIN VDE 0100 part 410) relatively for assembly, putting into operation and operation of these pressure sensors.

Mistakes and changes in the sense of technical improvementsreserved.

Related posts:

1. absolute pressure
2. differential pressure

absolute pressure sensor with lcd

How do our absolute pressure sensor work? Read this in our description!

The barometric pressure in non-aggressive gasses and atmospheres can be grasped with the pressure sensor for the measuring of absolute pressure. The used measuring element is a pressure sensor produced into silicon technology. The pressure sensor use a wheatstone resistance bridge for the recording of the pressure change which was diffused into the silicon crystal. The measurement signal gets temperature and pressure compensated by means of microprocessor. Every pressure transmitter will be calibrated during the manufacturing process. Through this a high reliability and precision of the pressure sensor is guaranteed.

Different signals are available as an output signal depending on application case. Besides the norm signals of 0 …. 10 V or 4 …. 20 mA the pressure transmitters for absolute pressure can also be delivered with a gSPI interface. It is also possible to deliver the absolute pressure pressure sensors with composite output signals so that the output signal can be chosen at the site of usage by means of jumper.

The gSPI interface is a bus system. Up to 120 pressure transmitters can be operated at this. The connection of pressure sensors for absolute pressure without gSPI interface is carried out via bus coupler modules to the gSPI bus.

The pressure-measuring transducers are obstructed in a plastic housing in IP65. The pressure-measuring transmitter can optionally be equipped with a 4-digit LCD for the indication of the measurement. The unity is also displayed on the display besides the measurement.

The pressure-measuring transducer can alternatively be delivered for absolute pressure also in a high-grade steel execution. The absolute pressure can be detected in liquids and aggressive media with that. At this execution the measuring element consists of a pressure sensor found in thin film technology on a high-grade steel membrane. It is therefore guaranteed that all medium touching parts consist of high-grade steel completely. A wheatstone resistance bridge is used for the detection also at this pressure sensor. By use of a microprocessor the measurement signal of the wheatstone bridge gets temperature and pressure compensated. Before delivery this pressure transmitter is also calibrated to be able to guarantee a high precision and reliability.

This pressure-measuring transducer can be delivered with the output signals 0 …. 10 V, 4 …. 20 mA or 0 …. 20 mA.

The use of these pressure transmitters for absolute pressure is carried out in the clean room, medicine and filtering technique in ventilation and climate channels into paint spraying cabins or into canteen kitchens.

Every absolute pressure pressure transducer can be delivered on request with calibrating certificate also with DKD-calibrating certificate.

absolute pressure sensor in high-grade steel

Hints

You may link to this page!

The pressure transmitter is maintenance-free.

This page was arranged with care. It, however, was not possible to take into account all conceivable application cases. If you should miss notes for your special formulation, use the contact form for your questions.

Indications for safety reasons

Observe the corresponding national safety regulations (e.g. DIN VDE 0100 part 410) absolutely for assembly, putting into operation and operation of these pressure sensors.

Mistakes and changes in the sense of technical improvements reserved.

Related posts:

1. relative pressure
2. differential pressure

pressure switch with lcd

How do our pressure switch function? Study this in our summarization!

The pressure in non-aggressive gasses and atmospheres can be grasp with the pressure switch for the metering of pressure. The used metering item is a pressure detector produced into Si technology. The pressure sensor use a wheatstone resistance bridge for the capturing of the pressure alteration which was diffused into the silicon crystal. The measurement signal gets temperature and pressure compensated by means of IC. Each pressure switch will be calibrated during the assembling method. Through this a high reliability and correctness of the pressure sensor is guaranteed.

Dissimilar signals are ready for use as an output signal depending on application example. Besides the norm signals of 0 …. 10 V or 4 …. 20 mA the pressure switch can also be delivered with a gSPI interface. It is also possible to deliver the pressure switch with mixed output signals so that the output signal can be chosen at the location of use by means of jumper.

The gSPI interface is a bus system. Up to 120 pressure transmitters and pressure switches can be achieved at this. The coupling of pressure switches without gSPI interface is carried out by bus connection modules to the gSPI bus.

The pressure-metering switch are obstructed in a synthetic housing in IP65. The pressure-gauging switch can alternatively be assembled with a 4-digit LCD for the indication of the measurement. The unity is also shown on the display as well as the measurement.

The pressure-metering transmitter can instead be distributed for pressure also in a extreme-grade steel execution. The pressure can be measured in liquids and aggressive conditions with that. At this version the gauging item consists of a pressure sensor established in thin film technology on a extreme-grade steel membrane. It is therefore guaranteed that all medium touching parts consist of exorbitant-grade steel completely. A wheatstone resistance bridge circuit is used for the detection also at this pressure sensor. By use of a semiconductor chip the measurement signal of the wheatstone bridge gets temperature and pressure compensated. Previous to delivery this pressure switch is also calibrated to be able to attest a extreme precision and accuracy.

This pressure-measuring switch can be delivered with the output signals 0 …. 10 V, 4 …. 20 mA or 0 …. 20 mA.

The use of these pressure switches is carried out in the clean room, medication and filtering technique in ventilating systems and climate channels into paint spraying cabins or into canteen kitchens.

Each pressure switch can be distributed on call with a calibrating certificate also with DKD-calibrating testification.

pressure switch with lcd in high-grade steel

Hints

You may link to this page!

The pressure switch is maintenance-free.

This page was arranged with care. It, even so, was not possible to take into account all conceivable function circumstances. If you should miss notes for your particular formulation, use the contact form for your questions.

Indications for safety causes

Notice the corresponding national safety regulations (e.g. DIN VDE 0100 part 410) absolutely for assembly, putting into operation and operation of these pressure switches.

Mistakes and changes in the sense of technical improvements reserved.

No related posts.